HVAC Cleaning in Hurst - Same-Day Service, Done Right the First Time

Fast, Reliable HVAC Cleaning Across Hurst

HVAC cleaning in Hurst typically runs $275-$650 for a complete system service, and most jobs are finished in a single visit. If you live in one of the 1960s or 1970s ranch homes that make up much of Hurst’s 76053 and 76054 ZIP codes, your system likely needs attention that’s more specialized than a standard duct vacuuming.

Call (866) 347-2063

We’ve been driving out to Hurst from our Houston office for over 42 years, and we know the difference between a quick pass with a shop vac and the thorough cleaning these older systems actually need. The mid-cities bedroom community was built fast, with slab-on-grade construction and under-slab supply ducts that weren’t designed for half a century of North Texas clay soil movement. When you call (866) 347-2063, you’ll reach a live person who knows Hurst, knows these houses, and can get you scheduled with a background-checked, uniformed technician who’ll show up when we say we will.

Why Bellows Air Duct & Vent Co. of Texas Is Hurst’s Preferred HVAC Cleaning Company

Our reputation in Hurst was built the slow way - one ranch home at a time, one camera inspection at a time. Homeowners in neighborhoods like Oakwood Terrace and the older sections of Bedford-Euless Road call us back because the price we quote on the phone matches the price on the invoice, and because our 90-Day Done Right Promise means something here. These houses don’t forgive shortcuts.

We answer calls 24 hours a day with a live person, not an app or a voicemail maze. That matters in Hurst, where summer attic temperatures north of 150°F can turn a marginal system into an emergency fast. Our technicians are background-checked and uniformed, and they carry the documentation of our camera inspections - before and after every job - so you see what came out of your system, not just take our word for it.

Response time to Hurst is typically same-day or next-day, and we don’t charge extra for the trip out to Tarrant County. We know the local building patterns: the original sheet-metal trunk lines, the early duct-board systems, the flex-duct additions from the 1980s and 1990s that are now brittle from attic heat cycling. That local knowledge saves time on every job, and it means we spot problems that a generalist cleaner might miss entirely.

Our HVAC Cleaning Services in Hurst

Evaporator Coil Cleaning

The evaporator coil in your Hurst home’s air handler is where the real work happens, and where neglect shows up first. In our climate, coils develop a sticky film of pollen, dust, and microbial growth that insulates the fins and forces your compressor to run longer and hotter. A typical evaporator coil cleaning in Hurst runs $180-$340, depending on accessibility and contamination level. We use professional-grade foaming agents and low-pressure rinses that clean without bending the delicate aluminum fins. For homes in ZIP 76053 with original duct-board trunks, coil cleaning is often urgent - those degrading trunks shed fiberglass particles that collect on wet coil surfaces and create a mat that no filter stops.

Heat Exchanger Cleaning

Heat exchanger cleaning is non-negotiable safety work, and in Hurst’s older gas-fired systems, it’s where we find the most hidden problems. Decades of combustion byproducts, combined with the dust load from leaky return plenums in these aging ranch homes, can restrict airflow and create dangerous CO risk. We inspect with cameras and fiber-optic scopes before any cleaning begins. A heat exchanger cleaning in Hurst typically costs $220-$380. If we find cracks or deterioration, we’ll show you the footage and explain your options plainly - no scare tactics, just facts. Wade Kellerman has always been clear about this: a compromised heat exchanger is a replacement, not a cleaning job, and we’ll tell you straight.

Blower Cleaning

The blower assembly moves every cubic foot of air through your Hurst home, and when its vanes are coated with dirt, the motor works harder, draws more amps, and fails sooner. Blower cleaning runs $150-$280 in Hurst, and it’s often paired with evaporator coil service since both live in the same air handler cabinet. In the 1960s and 1970s ranches that dominate Hurst’s housing stock, blowers are frequently original equipment or long-ago replacements that sit in sheet-metal housings never designed for modern airflow demands. We clean the housing, the wheel, and the motor assembly, then verify amp draw and RPM before we close up.

Condenser Cleaning

Your outdoor condenser coil in Hurst faces a brutal environment: West Texas dust events, Ashe juniper pollen from November through February, and then four months of 100°F-plus operation that bakes debris onto the fins. A condenser cleaning in Hurst typically costs $130-$240. We disassemble the top and use foaming cleaner with low-pressure water - never high-pressure, which folds the fins flat and ruins efficiency. For homes near major roads like Pipeline Road or Hurstview Drive, where traffic particulates add to the dust load, we often recommend condenser cleaning as annual maintenance.

Air Handler Cleaning

The air handler is the central station of your HVAC system, and in Hurst’s older homes, it’s often a converted closet or garage corner that was never meant to house modern equipment. Full air handler cleaning, including the cabinet, drain pan, and associated components, runs $200-$360. We find that many Hurst air handlers have never been opened for cleaning in 20 or 30 years of service. The drain pans alone can harbor sludge that blocks condensate flow and risks ceiling damage. Our camera documentation shows you exactly what we found and what we removed.

Coil Treatment

After cleaning, we offer antimicrobial coil treatment for Hurst homes that have struggled with recurring microbial growth or musty odors at startup. Coil treatment costs $80-$150 as an add-on to evaporator service, and it uses EPA-registered products that inhibit growth without coating the fins with residue. In Hurst’s humid shoulder seasons, when systems cycle on and off frequently, this treatment can prevent the slime buildup that starts the cycle all over again. We don’t push it on everyone - we’ll show you the camera footage and let you decide if your coil conditions warrant it.

Trusted Brands We Service in Hurst

We clean and service equipment from every major manufacturer, and we carry cleaning attachments and replacement parts from Rotobrush, Honeywell, and Aprilaire on every truck that rolls to Hurst. That means no waiting for a parts run to Fort Worth while your system sits open. For the specific challenges of Hurst’s older housing stock - degraded duct-board, brittle flex-duct, under-slab supply runs - we also stock specialized access fittings and sealing materials that most cleaners don’t carry. If your system needs a component we don’t have, we’ll tell you before we start, not after we’ve got it apart. That’s the square deal we’ve offered since 1984.

Common HVAC Cleaning Problems We See in Hurst Homes

• Under-slab duct infiltration. In Hurst’s 76053 ZIP, many 1960s ranch homes have under-slab supply ducts that were installed with no liner, allowing expansive clay soil to infiltrate through cracks and deposit decades of fine dirt and moisture into the HVAC system. Standard cleaning can’t fix this without sealing, but our camera inspection will show you exactly what’s happening.
• Duct-board trunk degradation. Original duct-board trunks in Hurst attics reach 150°F-plus during North Texas summers, degrading the resin binders and shedding fiberglass particles into supply registers. Homeowners notice white dust on furniture near vents - that’s degraded duct material, not ordinary household dust.
• Flex-duct connection failure. Flex-duct connections dried and cracked by extreme attic heat pull in insulation dust and pollen during every cooling cycle. In Hurst, we regularly find original flex-duct from the 1980s that’s brittle enough to crumble on contact.
• Coil contamination from return leaks. Leaky return plenums in these aging systems pull unfiltered attic air across the evaporator coil, creating a mat of dust and pollen that no filter change will address. The coil has to be cleaned, and the return leaks have to be sealed, or the problem returns in one season.

We recently cleaned an original 1968 slab-on-grade ranch on Oakwood Drive in ZIP 76053. The under-slab supply runs had been leaking soil fines for years, and our Rotobrush extraction pulled out nearly 40 pounds of compacted clay and debris that had bypassed every filter.

Pricing for HVAC Cleaning in Hurst, TX

We Also Serve Cities Near Hurst

Our Hurst service area extends to Bedford, Richland Hills, North Richland Hills, and Colleyville - the same mid-cities bedroom communities built in the same era with the same slab-on-grade construction patterns and the same under-slab duct vulnerabilities. If you’re in one of these neighboring cities and your home dates to the 1960s or 1970s, the same local expertise applies. Our HVAC Cleaning team knows these houses because we’ve been cleaning them for decades.

FAQs - HVAC Cleaning in Hurst