Fast, Reliable Duct Repair & Sealing Across Fresno
Duct repair and sealing in Fresno, TX typically costs $180-$650 depending on the scope, and most jobs are completed in a single visit. If your home was built in the 1990s-2000s and your ducts run through an unconditioned attic, you’re likely losing 20-30% of your cooled air through cracked seals and degraded flex duct.
We know Fresno. Our technicians make the run from Houston daily, and we’re usually on-site in the 77545 area within a couple of hours of your call. We’ve worked the neighborhoods along Mustang Bayou, the subdivisions off FM 521, and the tract homes near Sienna Plantation Road. The housing stock here is specific, the climate is punishing, and the duct failures we see in Fresno are different from what we find in Sugar Land or Missouri City. That’s why local experience matters on this job.
Call (866) 347-2063. A live person answers, 24 hours a day. We’ll give you an honest price before we lift a single tool, and we back every repair with our 90-Day Done Right Promise in writing.
Why Bellows Air Duct & Vent Co. of Texas Is Fresno’s Preferred Duct Repair & Sealing Company
We’ve been serving Fort Bend County homeowners since 1984, and Fresno has been on our route for decades. The reputation we’ve built here comes from showing up when we say we will, doing what we said we’d do, and standing behind it without paperwork or arguing. Our Duct Repair & Sealing team doesn’t subcontract; these are our own background-checked, uniformed technicians, and they answer to our office, not a third-party dispatch board.
Fresno customers call us back because we camera-inspect every duct system before and after repair. You see what we see. No claims without proof. We’ve earned strong reviews from homeowners across 77545 who were tired of bait-and-switch pricing and wanted a square deal. Our response time to Fresno averages under two hours for standard calls, and we carry the parts and materials to finish most repairs in one trip.
We understand the local conditions that break ducts here: the 130°F+ attic temperatures that cook mastic seals, the post-Harvey moisture that wicks into insulation and duct lining, the Gulf Coast humidity that never really lets up. That knowledge changes how we approach a repair. We’re not guessing. We’ve seen it.
Our Duct Repair & Sealing Services in Fresno
Duct Sealing
Most Fresno homes built in the 1990s-2000s have duct joints sealed with mastic that was rated for normal attic conditions, not the 150°F peaks we see here in July and August. That mastic cracks, shrinks, and separates. Cooled air pressurizes out of those gaps straight into your attic. You’re paying to air-condition your insulation.
We seal with professional-grade mastic compounds rated for extreme temperature cycling, and we pressure-test after application to verify the seal holds. In Fresno’s climate, proper duct sealing typically pays for itself in 12-18 months through reduced energy bills. A typical sealing job for a 2,000-square-foot home in Fresno runs $280-$450.
Flex Duct Repair
Flex duct is common in Fresno’s suburban tract homes because it’s fast to install and cheap to buy. It’s also the first thing to fail when moisture gets involved. The inner liner delaminates. The insulation sags. Pinholes develop, pulling humid attic air into your supply air. We’ve replaced flex duct in homes near Mustang Bayou where the original 2002 installation had turned into a soggy, collapsed tube.
We source replacement flex duct from Nikro and Abatement Technologies, sized and insulated for Gulf Coast conditions. A typical flex duct repair or replacement run in Fresno costs $180-$340 per section, depending on length and attic accessibility. Most repairs are done same day.
Metal Duct Repair
Some higher-end Fresno homes and certain commercial buildings have galvanized metal ductwork. Metal doesn’t absorb moisture like flex duct, but the seams and joints still fail, especially where original installers used tape instead of proper mastic. We’ve found metal ducts in Fresno with rusted seams from years of condensation cycling, and we’ve repaired sections where post-Harvey remediation contractors walked on duct runs and crushed them flat.
Metal repair requires different techniques: sheet metal patching, proper seam sealing, and sometimes section replacement. Typical metal duct repair in Fresno runs $320-$650 depending on accessibility and extent of damage.
Duct Insulation & Mastic Sealant
Here’s a Fresno-specific problem: even perfectly sealed ducts will sweat if the insulation is thin or degraded. In our humidity, that condensation drips back into the duct, or onto your ceiling drywall, or both. We see this constantly in 77545 homes where the original R-6 insulation has compressed to R-3 or worse.
We rewrap with proper insulation and seal all penetrations with Honeywell-specified mastic compounds. A full insulation and sealing package for a typical Fresno home runs $450-$780. It’s not cheap. But neither is replacing water-damaged drywall or running a dehumidifier year-round because your ducts are raining inside your attic.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Fresno
We stock parts and materials from Rotobrush, Nikro, Honeywell, and Aprilaire, the same brands serious HVAC contractors specify for commercial installations. That means no waiting on a parts run to Houston when your flex duct is collapsed and your bedroom has no airflow. Our trucks carry mastic sealant rated for 200°F continuous exposure, flex duct in standard residential diameters, and insulation wraps that meet current Fort Bend County energy code. For Fresno homeowners, that translates to one visit, one crew, and a finished job you can verify on camera before we leave.
Common Duct Repair & Sealing Problems We See in Fresno Homes
- Mastic seals fail prematurely due to repeated 130°F+ attic temperatures, causing pressurized duct joints to leak cooled air directly into the attic. We reseal with high-temperature-rated compounds and pressure-test to confirm zero leakage.
- Flex-duct lining degrades from long-term exposure to flood-sourced moisture, leading to pinhole leaks that pull in humid attic air and drip condensation onto drywall. This is especially common in homes near Mustang Bayou that saw Harvey water intrusion.
- Post-Harvey homes often have damaged duct board from contractor foot traffic during remediation, creating air leaks that negate cleaning unless sealed first. We camera-inspect to find these hidden breaches before recommending any cleaning service.
- Under-insulated supply ducts develop exterior condensation in Fresno’s persistently high dew points, feeding mold growth inside the duct system that routine filter changes never reach. Re-insulation combined with proper sealing is the only lasting fix.
Pricing for Duct Repair & Sealing in Fresno, TX
| Service | Typical Range in Fresno | Most Common Price Point |
|---|---|---|
| Duct sealing (whole system) | $280-$450 | $340 |
| Flex duct repair/replacement (per run) | $180-$340 | $260 |
| Metal duct repair (section) | $320-$650 | $480 |
| Duct insulation rewrap + seal | $450-$780 | $590 |
| Emergency after-hours call | $150-$220 (trip charge) | $185 |
What moves the price? Attic accessibility is the big one. A walk-up attic with decking costs less than a tight crawl with blown insulation we have to move. The extent of moisture damage matters too; a simple resealing is cheaper than replacing four feet of delaminated flex duct and the surrounding wet insulation. We show you everything on camera before we quote. The number we give is the number on the invoice.
We offer $50 off any repair over $250, a free second opinion on any written estimate from another company, and a permanent 5% senior and veteran discount. Call (866) 347-2063 for a free estimate.
We Also Serve Cities Near Fresno
Our crews run daily to Fresno and the surrounding communities: Sienna Plantation, Missouri City, Manvel, and Stafford. Same trucks, same technicians, same upfront pricing and 90-Day Done Right Promise. If you’re in Fort Bend County and your ducts are leaking, we’re already in the neighborhood.
Serving Fresno, TX - Our Local Coverage Area
We’re based in the Fresno area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Duct Repair & Sealing in Fresno
Fresno’s flood risk means many homes still have ductwork contamination from 2017 Hurricane Harvey water intrusion that was never properly addressed. Moisture wicked into attic insulation and duct lining, fostering mold colonies that routine maintenance never reaches. We regularly find active mold on interior duct board in homes whose owners completed surface-level remediation but never had the ductwork inspected. If your home is in the 77545 ZIP and was built before 2010, we recommend a camera inspection before any sealing work. Call (866) 347-2063 to schedule - estimates are free.
Fresno attics regularly hit 130-150°F in summer, far exceeding the temperature ratings of standard mastic compounds used in original construction. That thermal cycling cracks and shrinks seals in 10-15 years here, compared to 20-25 years in cooler climates. We reseal with high-temperature-rated mastic specified for Gulf Coast conditions and verify with pressure testing. The difference in material quality matters more in Fresno than almost anywhere else we work. Call (866) 347-2063 for an inspection and exact quote.
Yes, but only if the full extent of moisture damage is identified first. We recently repaired a 2003 tract home near Mustang Bayou where a leaking roof during Harvey had dripped directly onto a flex-duct run, causing the inner liner to delaminate. After sealing the leak with Honeywell mastic and replacing four feet of damaged flex duct, we restored airflow to the master bedroom that had been stagnant for years. Camera inspection is essential; surface cleaning without repair just circulates spores through new leaks. Call (866) 347-2063 - we’ll show you what we’re dealing with before we quote.
Fort Bend County’s building code requires duct sealing to meet current energy efficiency standards when any HVAC component is replaced or when structural repairs trigger permit requirements. Standalone duct sealing for maintenance or performance improvement typically does not require a permit, but we seal to code standards regardless. If your repair follows storm damage remediation, we coordinate with your contractor to ensure our work satisfies any inspection requirements. Call (866) 347-2063 and we’ll walk you through what applies to your specific situation.
Standard cloth-backed “duct tape” should never be used on any duct system, and in Fresno’s climate it fails faster than almost anywhere. The adhesive degrades in months under attic heat, leaving a sticky residue that contaminates surfaces and prevents proper mastic adhesion later. We remove old tape residue as part of our sealing process and apply professional-grade mastic compounds rated for continuous 200°F exposure. If someone has taped your ducts as a “repair,” it needs proper resealing. Call (866) 347-2063 for a free inspection.
Ready to stop losing cooled air to your attic? Call Bellows Air Duct & Vent Co. of Texas at (866) 347-2063. A live person will answer, 24 hours a day. We’ll give you an honest price before we start, camera-verify every repair, and back it with our 90-Day Done Right Promise in writing. No bait coupons, no surprises on the bill. Just a square deal, done right.
Written by Wade Kellerman, Owner at Bellows Air Duct & Vent Co. of Texas, serving Fresno and Fort Bend County since 1984.