Dryer Vent Cleaning in Selma - Same-Day Service, Done Right the First Time

Fast, Reliable Dryer Vent Cleaning Across Selma

Dryer vent cleaning in Selma typically runs $149-$289 for a standard single-family home, and most jobs are completed in a single visit the same day you call. If your dryer is taking two cycles to finish a load, or if you notice excess heat in your laundry room, the vent is likely clogged with lint mixed with the fine caliche dust that circulates through Selma’s fast-built 2000s subdivisions.

Call (866) 347-2063

We’ve been driving out to Selma from our Houston office for years, and we know the territory. The tract homes off Lookout Road, the neighborhoods near Retama Parkway, the subdivisions threading between I-35 and Loop 1604 - these are the houses we work on every week. Most were built in a rush during the 2000s housing boom, and the dryer vent systems in those homes are now hitting the age where neglect turns into real problems. We’re familiar with the slab-on-grade construction, the flex-duct runs through 140°F attics, and the unsealed plumbing chases that pull construction dust and pollen into ventilation paths - issues our Air Duct Cleaning in Selma team encounters regularly. When you call (866) 347-2063, you’ll reach a live person, 24 hours a day. We’ll give you an honest price upfront, show up when we say we will, and camera-inspect the vent before and after so you see the difference.

Why Bellows Air Duct & Vent Co. of Texas Is Selma’s Preferred Dryer Vent Cleaning Company

We’ve built our reputation in Selma the old way: by doing what we said we’d do and standing behind it. Our Dryer Vent Cleaning in Selma work comes with the 90-Day Done Right Promise stamped on every job. If something isn’t right, we make it right. No paperwork, no arguing. That’s been our policy since 1984.

Selma homeowners call us back because we answer the phone. Not a voicemail tree, not an app. A live person, any hour of the day. Our technicians are background-checked, uniformed, and equipped with professional-grade Rotobrush and Nikro systems. Most jobs finish in one visit. And we show you the camera footage - before and after - so you’re not taking our word for anything.

We understand the local conditions that other companies miss. The extreme attic heat in Selma’s 78154 ZIP code degrades flex-duct connections in ways you don’t see in older homes or cooler climates. The caliche dust from ongoing commercial construction near the I-35 corridor works its way into dryer vents even when windows stay shut. And the Ashe juniper pollen that blankets the area from December through February compounds lint buildup in ways that create genuine fire hazards. We don’t just clean vents. We diagnose why they got clogged in the first place.

Our Dryer Vent Cleaning Services in Selma

Dryer Vent Inspection

Every job starts with a camera inspection. We feed a high-resolution camera through the full length of your vent run, whether it exits through the roof, the soffit, or a side wall. In Selma’s slab-on-grade homes, we often find sagging flex-duct in the attic where 140°F summer heat has loosened strap supports, creating low spots where lint and caliche dust collect into dense mats. The camera doesn’t lie. You’ll see exactly what we see before we lift a single tool.

Vent Cleaning & Lint Removal

This is where our Dryer Vent Cleaning team earns its keep. We use Rotobrush agitation systems and high-velocity Nikro vacuums to remove packed lint, caliche dust, and compressed pollen from the entire vent run - not just the first few feet from the dryer. On a call near the I-35/Loop 1604 interchange, our crew found a dryer vent clogged with fine caliche dust mixed with lint from a 2008-built tract home. The return plenum had pulled in the dust through unsealed plumbing chase penetrations, and we used a Rotobrush system to clear the blockage, restoring airflow and reducing drying time by 40%. Most Selma homes need this service every 12-18 months given the local heat and dust conditions.

Vent Rerouting

Some Selma homes were built with vent runs that are too long, too many elbows, or that terminate in problematic locations. The 2000s tract construction prioritized speed over optimal design. We reroute vents to shorter, straighter paths when possible, using rigid metal duct where code allows. In slab homes, this sometimes means running a new vent through a different wall cavity or converting a roof termination to a soffit termination to eliminate a common leak point. Every reroute is priced upfront before we cut anything.

Bird Guard Installation

Selma’s location on the edge of developing prairie means birds, wasps, and rodents investigate vent terminations regularly. A missing or damaged vent cap is an open invitation. We install steel mesh bird guards and replacement vent caps that keep wildlife out while maintaining proper airflow. This is preventive work that saves you from a much more expensive call later.

Vent Cap Replacement

The plastic vent caps installed on many Selma homes in the 2000s have brittle, cracked, or gone missing entirely after years of UV exposure and attic heat cycling. We replace these with durable metal caps designed for Texas conditions, properly sealed and screened.

Trusted Brands We Service in Selma

We don’t show up with hardware-store equipment. Our trucks carry professional-grade Rotobrush agitation systems, Nikro high-velocity vacuums, and Honeywell and Aprilaire Air Quality & Sanitizing - Selma components - the same brands serious HVAC contractors specify for commercial jobs. For Selma homeowners, this means we can handle whatever vent configuration your builder installed, and we stock common replacement caps and guards so you’re not waiting on a parts order. Most jobs are completed in a single visit because we arrive prepared.

Common Dryer Vent Cleaning Problems We See in Selma Homes

• Flex-duct connections loosen from extreme attic heat. Selma’s unconditioned attics regularly exceed 140°F in summer, degrading the tape and strap connections on flex-duct runs. Gaps open, pulling blown-in insulation fibers into the vent path where they tangle with lint into dense, airflow-blocking clogs.
• Unsealed plumbing chases pull in caliche dust. The fast-built 2000s slab construction common across Selma left unsealed penetrations around plumbing chases. These act as direct conduits from exterior and crawl space into the return-air path, circulating fine alkaline caliche dust that embeds in dryer vents even in homes where windows never open.
• Ashe juniper pollen compacts into fire-hazard lint. Selma’s December-through-February mountain cedar season loads return-air grilles with ultra-fine pollen. This pollen embeds in duct liner, works its way to the dryer vent, and compresses with lint into hardened deposits that restrict airflow and create genuine fire risks.
• Original vent caps failed from heat and UV exposure. The cheap plastic caps installed during the 2000s construction boom have now seen 15-20 years of Texas sun and attic heat cycling. They’re cracked, missing louvers, or gone entirely, allowing birds and wasps to nest directly in the vent termination.

Pricing for Dryer Vent Cleaning in Selma, TX

We Also Serve Cities Near Selma

Our service radius covers the full Northeast San Antonio metro. We regularly dispatch to Selma neighbors in Schertz, Universal City, Cibolo, and Converse - the same day, the same upfront pricing, the same 90-Day Done Right Promise. If you’re unsure whether we cover your address, call and ask. We answer live, 24 hours a day.

FAQs - Dryer Vent Cleaning in Selma