Aprilaire HVAC Cleaning in Texas, TX | Bellows Air Duct & Vent Co. of Texas

Aprilaire HVAC Cleaning in Texas: What to Know First

We provide independent Aprilaire HVAC cleaning across Texas, with most evaporator coil, blower, and air handler jobs completed in a single visit and upfront pricing given before we touch a tool. A typical Aprilaire system in a Texas home runs $189-$449 to clean depending on access and contamination level, and we back every job with our 90-Day Done Right Promise in writing. This page is for homeowners who know they own an Aprilaire unit and want it cleaned by technicians who understand the brand’s coil geometry, blower housing design, and how North Texas hard water and summer humidity affect what we find inside. If that sounds like your situation, call us at (866) 347-2063 and we’ll walk you through it.

Call (866) 347-2063

How Aprilaire Products Fail - and How We Fix Them

• Model 5000 Electronic Air Cleaner blower motor strain. The 5000’s high-efficiency filter media loads up faster than owners expect in Texas, especially during spring pollen and cottonwood season. The blower works harder, draws more amps, and the motor bearings fail prematurely. We pull the blower assembly, clean the housing and wheel, measure amp draw against Aprilaire’s spec, and treat the coil so the system isn’t fighting restricted airflow.
• Model 8100 Energy Recovery Ventilator (ERV) core contamination. The enthalpy core in the 8100 traps Texas humidity and outdoor particulates; we’ve pulled cores in Plano and Frisco homes that were visibly mold-stained from condensation sitting through August. We clean or replace the core, sanitize the cabinet, and verify the defrost cycle is functional - a step discount cleaners skip.
• Model 1850/1870 dehumidifier evaporator coil freeze-up. These whole-home dehumidifiers run hard in Texas crawl spaces and garages. The narrow fin spacing on the 1850 coil traps dust and dog hair; restricted airflow drops suction pressure and ices the coil. We clean with foaming agent and low-pressure rinse, check refrigerant charge, and confirm the defrost thermostat is cycling properly.
• Model 600/700 humidifier pad and solenoid scaling. North Texas hard water calcifies the water panel and solenoid valve in 18-24 months. The pad gets rock-hard, airflow drops, and the solenoid chatters or sticks open. We descale the orifice, replace the pad with the correct Aprilaire #35 or #45 (not a generic cut-to-fit), and set the humidistat to a realistic winter target for this climate.
• Model 2410/4010 media air cleaner bypass leakage. The cabinet seal on these units degrades where the door meets the track; we see this in older Texas homes with flex duct vibration. Dirty air bypasses the MERV 13 media and coats the evaporator coil downstream. We clean the coil, replace the gasket or realign the door, and pressure-test the seal so the filter actually does its job.

Our Aprilaire HVAC Cleaning Process

1. 1
   Call and schedule. A live person answers, asks for your model number if you have it, and gives you a price range based on what you’re describing. No bait, no coupon required.
2. 2
   Arrival and camera inspection. Our technician arrives in a marked van, uniformed and background-checked. We run a camera through the ductwork and photograph the evaporator coil, blower, and air handler interior before touching anything. You see what we see.
3. 3
   Diagnosis and parts decision. We identify whether your unit needs OEM Aprilaire components or if a quality aftermarket part meets spec without voiding remaining warranty coverage. We explain the difference and the cost, and you approve before we proceed.
4. 4
   Cleaning and repair. Using Rotobrush and Nikro equipment, we clean the coil with appropriate foaming agent, pull and wash the blower wheel, vacuum the air handler cabinet, and treat any microbial growth. We also service connected Lennox, Trane, or Carrier components if they’re part of the same system.
5. 5
   Testing and documentation. We measure static pressure, temperature split, and amp draw against manufacturer spec. The after photos go on the invoice. We don’t leave until the airflow numbers make sense.
6. 6
   Guarantee in writing. You get the 90-Day Done Right Promise stamped on your paperwork. If something’s not right, we return at no charge. No paperwork to file, no argument.

What Aprilaire HVAC Cleaning Costs in Texas

What moves the price: accessibility (attic vs. closet), contamination level (light dust vs. construction debris or pet hair), whether the coil needs chemical treatment, and if we find a failed part during inspection. We disclose the full price before starting. Estimates are free. Call (866) 347-2063 for your exact quote.

Why Texas Homeowners Call Bellows Air Duct & Vent Co. of Texas for Aprilaire Work

We’ve been at this since 1984, and Wade Kellerman learned the trade in his grandfather’s shop on Zang Boulevard in Oak Cliff before formal training at Eastfield College in Mesquite. That background matters when we’re crawling a Dallas attic in July to reach an Aprilaire 1850 dehumidifier that’s been running nonstop since May.

Our technicians are uniformed, background-checked, and equipped with the same Rotobrush, Nikro, and Abatement Technologies gear that serious HVAC contractors specify. We also service Lennox, Trane, and Carrier systems, so when your Aprilaire component is integrated with another brand’s air handler, we don’t need to call in a second company. Calls are answered by a live person 24 hours a day, most jobs finish in one visit, and our 90-Day Done Right Promise means we stand behind it - and around here, that has meant something for a long time.

FAQs